canon.com/ijsetup 

canon.com/ijsetup - Ij Start Canon Setup

canon.com/ijsetup - Unboxing and setting up is the primary process to be performed by any user after the Canon ij setup printer is purchased. After the setup procedure is done, you can perform the functions of the Canon ij printer such as scanning or faxing. Go with the procedure that is given here for setting up the printer.

Ij Canon Unboxing Setup - How to setup printer

1. Ensure that the correct seal is printed on top of the package.
2. Replace the Canon ij printer if the seal is not available.
3. Now use a sharp component for opening the shipment box. Take the accessories such as power cable, user manual, and others out of it.
4. Remove the Canon ij printer from the packaging box and then keep it on a dust-free surface.
5. Confirm that the Canon ij printer meets the conditions such as temperature and humidity.
6. Establish the power connection by attaching the electrical cord between the canon.com/ijsetup printer’s rear and the power source.
7. Use the ON button to switch On the Canon ij setup printer.
8. Make sure to load the cassette with enough amount of white papers and then insert the black, color ink tanks into the correct slots. 

Canon ij Driver & Manual Download from www.canon.com/ijsetup  

1. Obtain the driver and the user guide for your Canon ij printer for free from this site - canon.com/ijsetup.
2. For downloading the software, click on the Driver Download button.
3. To get the PDF copy of the manual on your personal computer or mobile device, select the Manual Download button.
4. If you experience any problem while installing the driver, feel free to contact our tech support team. 

Canon ij Wireless Connection

You can connect the canon.com/ijsetup to your network with or without using the software. Select a method that you want to use to establish a wireless connection. You can follow the Easy Wi-Fi connect method to connect your printer to the network without a wireless router. You need to enter the router information on your computer that is connected to your printer. You can also use the WPS or WPS PIN method to set up the wireless connection.

Ij Start Canon Wireless Setup For Windows via canon.com/ijsetup 

1. Ensure that you have turned on your printer by checking whether the ON lamp is lit before you begin the wireless connection setup.
2. If the Follow the instructions screen appears on the display of the printer control panel, press the Stop button.
3. Press the Setup button (resembles tools icon) on the printer control panel.
4. Using the arrow keys, select the Wi-Fi setup option and press OK to validate your selection. 5. Select the WPS (Push button) option from the Wi-Fi setup menu and press OK.
6. Now, move to your wireless router and locate the WPS button on it.
7. Once you have located the WPS button on the router, press and hold it for a few seconds. 8. Press OK on the printer within a period of 2 minutes.
9. Press OK again when a prompt appears on the printer screen.
10. Touch the Copy button to complete the network connection setup.
11. Now, launch the driver installation wizard and complete the printer installation.
12. The above method is applicable if you have a WPS enabled access point.

Your browser does not support JavaScript, You should enable JavaScript to use this website.